The ALI CERTIFIED Atlas Platinum PVL-10 was engineered and built to offer a commercial grade above ground lift to those customers who have "fallen in love" with the reliability offered by the Double S column design and symmetric columns. Tens of thousands of above ground lifts incorporating the Double S column design have been sold worldwide over the past two decades. The Double S column design was so revolutionary, that it was protected by a patent. That patent has now expired.
The Atlas Platinum PVL-10 can be installed with the columns positioned symmetrically or asymmetrically. When the columns are installed in the asymmetrical configuration, there may be some benefit to open car doors. When the columns are installed in the symmetric configuration there is more width between the columns. Please check the specifications page and picture gallery to determine which height setting and column configuration (asymmetrical or symmetrical) would be the best for your application. Both column configurations offer easy vehicle access and superior vehicle lift point support due to the three stage front arm design.
The Atlas Platinum PVL-10 features three (3) stage telescoping front arms, double screw rubber/metal adapters with truck height extensions, protective rubber pads mounted to the carriage , rubber column guards, and a price that cannot be matched.
This product features an ALLY Hydraulic AL2850 Power Unit. This premium power unit is certified by MET Laboratories Inc. for electrical compliance in the United States and Canada. Extra heavy-duty armatures and more motor windings with increased silver metal included in the wires and connections create far less heat generation and allow ALLY Hydraulic power units to maintain constant torque through the lifting process. This power unit also carries an industry leading two-year limited warranty.
Finance Your Auto Lift Today. Apply Now.
Features include
Specifications include
| Atlas® Platinum Specifications | ||
| Setup | High | Low (requires spacers)* |
| Capacity | 10,000 LB. | 10,000 LB. |
| Lifting Time | Ask Your Salesperson | Ask Your Salesperson |
| Front Arm Length | (43 1/2" Max); (22" Min); (31 1/4" Mid) | |
| Rear Arm Length | (58" Max); (35" Min) | |
| Overall Height With Cylinder | 148" (12' 4") | 148" (12' 4")* |
| Overall Height | 139 7/8" (11' 7 7/8") | 135 7/8" (11' 3 7/8")* |
| Overall Width | 139" (11' 7") (Asymmetrical) 135 1/4" (11' 3 1/4") (Symmetrical) |
|
| Outside Column to Outside Column | 130" (10' 10") (Asymmetrical) 127 1/2" (10' 7") (Symmetrical) |
|
| Maximum Lift Height (With Adapters) | 81 1/2" (6' 9 1/2") (highest pad setting) 79 1/4" (6' 7 1/4") (lowest pad setting) |
81 1/2" (6' 9 1/2") (highest pad setting) 79 1/4" (6' 7 1/4") (lowest pad setting) |
| Maximum Lift Height (Without Adapters) |
70" (5' 10") (lowest pad setting), 72 1/2" (6' 1/2") (highest pad setting) |
70" (5' 10") (lowest pad setting), 72 1/2" (6' 1/2") (highest pad setting) |
| Pad Height | 4" | |
| Adapter Heights | 3" & 6" | |
| Minimum Arm Height | 4 1/2" | |
| Between Columns | 107 3/4" (8' 11 3/4") (Asymmetrical) 112 1/2" (9' 4 1/2") (Symmetrical) |
|
| Column Size | 10 1/4" x 7" | |
| Drive Through | 91" (7' 7") (Asymmetrical) 99 1/2" (8' 3 1/2") (Symmetrical) |
|
| Base of Lift | 18" x 15" | |
| Shut-Off Height | 134 1/4" (11' 2 1/4") | 130 1/4" (10' 10 1/4")* |
| Cable | .315" (8mm) | |
| Column Thickness of Steel | 6mm / double S column design increases column strength | |
| Carriage Thickness of Steel | Frame: 8mm Yoke: 16mm |
|
| Arms Thickness of Steel | Frame: 6mm Telescopic Arm: 8mm |
|
| Shipping Weight | 1,850 Lbs. | |
| NO LABOR WARRANTY | ||
| Requires a minimum of 4" of concrete with 3000 psi. All lifts come with a step by step instruction manual. *See manual for installing spacers for lower height. *Overall height with cylinder remains the same. |
||
