Search

Atlas Pro-9D Asymmetric Arms, Overhead 2 Post Auto Lift, 9000-lb

The Atlas® Pro-9D has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick-up points) and heavier pick-up trucks. 

Finance Your Auto Lift Today. Apply Now.

FREE SHIPPING

Features Include

  • 9,000 LB. Capacity
  • Light Commercial Grade
  • "Padded" Shut-Off Bar
  • Asymmetric/Symmetric Arms
  • Clear Floor Design
  • Powder Coat Finish
  • Dual Hydraulic Direct Drive Cylinders
  • Single Point Lock Release
  • Secondary Lock System (SLS)
  • Free 8 Piece Truck Adapter Set
  • Automatic Arm Restraints
  • Mounting Hardware Included
  • 5-year Structural Warranty, 2-year Hydraulic-Power Warranty

Specifications include


Atlas® Pro-9D Specifications
Capacity 9,000 LB.
Lifting Time Ask Your Salesperson
Overall Height 144" (12')
Overall Width 142 1/2" (11' 10 1/2") (With Power Unit)
133 7/8" (11' 1 7/8") (Without Power Unit)
Outside Column To Outside Column 124 1/8" (10' 4 1/8")
Lift Height
(Without Adapters)
On Locks: 68" (5' 8")
Not On Locks: 71 5/8" (5' 11 5/8")
Maximum Lift Height
(With Adapters)
On Locks: 74 1/2" (6' 2 1/2")
Not On Locks: 77 5/8" (6' 5 5/8")
Padded Bar Height 135 1/4" (11' 3 1/4")
Minimum Arm Height 4 1/2"
Inside Column 109 5/8" (9' 1 5/8")
Column Size 7 1/4" x 11"
Drive Thru 100 1/4" (8' 4 1/4") (Symmetric Arm Configuration)
92" (7' 8") (Asymmetric Arm Configuration)
Base of Lift 14 ½" x 18"
Column Thickness of Steel 5mm
Carriage Thickness of Steel 6mm
Arms Thickness of Steel 6mm
Cable Diameter .375"
Motor/Electrical Requirement 220V single (1) phase.
A 30 amp breaker is required.
Oil Requirement 3-5 Gallons AW32/AW46
Requires a minimum of 4" of concrete with 3000 psi.
Shipping Weight 1450 lbs.

Search

Commonly searched