Search

Atlas® 412A Closed Front, 4 Post Alignment Lift, 12,000-lb

The Atlas® 412A 12,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® alignment lifts offer many exclusive features not found on many other competitor’s lifts. Each Atlas® 412A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases. There is also a FREE air line kit ($300 value) included when you purchase the “combo package” (2-rolling jacks). The slip plates are built into the runways and are level with the front turntables. There are included metal cover plates (that cover the cut-outs for the turntables) so that the vehicle is not sitting on the turntable if the lift is not being used for alignment.

The Atlas® 412A (12,000 LB. capacity alignment lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 412A is tested to ensure that this alignment lift system will perform flawlessly at its rated capacities. The Atlas® 412A has been manufactured to the same exacting specifications for many years.

Finance Your Auto Lift Today. Apply Now.

FREE SHIPPING

Features include

  • Commercial Grade
  • Powder Coat Finish
  • Alignment Slip Plates And Turntables
  • Pneumatic Single-Point Lock Release
  • Lock Ladder Column Design
  • Automatic Shut-Off Switch
  • Diamond Plated Runway Surface
  • Mounting Hardware
  • 5-Year Structural, 2-Year Power Unit
  • and Cylinder Warranty

Specifications include

Atlas® 412A Specifications
Capacity 12,000 lb.
Lifting Height 75 1/2" (6' 3 1/2")
Overall Width Of Columns (Without Motor) 126" (10' 6")
Overall Width Of Columns (With Motor) 135" (11' 3")
Overall Length With Approach Ramp 230" (19' 2")
Overall Length Without Approach Ramp 200" (16' 8")
Length Between Columns 184 1/4" (15' 4 1/4")
Runway Length 186 1/2" (15' 6 1/2")
Runway Width 22" (1' 10")
Thickness Of Runway 7"
Width Between Runways 44 1/2" (3' 8 1/2")
Width Between Runway Rails 42" (3' 6")
Outside Runway To Outside Runway 84 3/4" (7' 3/4")
Clearance Under Runways 68 1/4" (5' 8 1/4")
Clearance Between Columns 112 1/4" (9' 4 1/4")
Height Of Columns 82" (6' 10")
Maximum Wheel Base 185" (15' 5")
Drive Thru 98 1/2" (8' 2 1/2")
Motor/Electrical Requirement 220 Volt, Single Phase;A 30 amp Breaker Is Recommended.
Shipping Weight 412 2,400 lb.412A 2,700 lb.

Search

Commonly searched